WISH LIST
SEARCH
RESELLERS
PRO

Eric Hall: Carbon Mast Pioneer and Inventor of Alphalock

Eric Hall (Alphalock) et Brieuc Vandaele (Karver)

As part of Karver’s acquisition of Alphalock in November 2026, our engineer Brieuc Vandaele spent a week in the United States with Eric Hall to train on the products.

As always, entrepreneurial stories are first and foremost human stories, and we were curious to learn more about Eric’s journey.

The interview is conducted by Brieuc.

Brieuc: I have a few questions to get to know you better, starting with your origins and your youth. Where did your passion for sailing begin? Was there a person, a boat or a moment that shaped your future?
Eric: Not really. We grew up with sailing. I like to tell this story: when my mother was pregnant with me, she raced in a very tough race, so I was already out there, sailing in it. We grew up sailing from our earliest days.
 
Brieuc: How did your aerospace background, including Grumman, influence your approach to marine engineering?
Eric: Grumman was a very good company to work for, because it gave me good engineering habits. For example, they handed you a bound calculation book: every calculation you put in it had to be dated, and you couldn’t rip out the pages. Grumman also gave me a chance to be creative, even as an engineer straight out of college.
When I first arrived, we rotated through three departments to get used to being at Grumman. One of them was Apollo Applications, which worked on applications for the moon rocket. We were in Vietnam at the time, and someone had the idea of using aluminized Mylar, the material used to build Echo, one of the early communication satellites: a big inflated balloon whose very shiny outer skin was aluminized Mylar. The idea was to create a mirror above Vietnam that would reflect the Sun from the other side of the world down onto the battlefield at night. To do this, the Mylar was stretched inside an inflated torus, a bit like a car tire tube. I built a model of it, just because I wanted to, and they let me do it.
Later, I worked on the F-14. First, though, they kept you in training for a year or so, in different places. You even went through the whole shop: riveting, doing everything, learning all there is to building airplanes. Only then did you move on to real engineering projects. Mine was the F-14, which was still being designed at the time, and my job was to design its stabilizer.
Here is a picture of the F-14 stabilizer: the very first one, a test article. My job was to take the boron composite, laid up in three-inch (75 mm) wide unidirectional prepreg fibers running in different directions, and fit it into a titanium picture frame. The edges of the boron were bonded onto steps in the frame, more or fewer depending on the number of fibers. At the time, nobody knew how to transition the steps, say from 12 down to two or three. I was very interested in solving that problem; I kept thinking about it and eventually came up with a method they liked.
 
Brieuc: How did you and Phil Garland come to establish Hall Spars in 1980?
Eric: I didn’t know Phil, but Eric Goetz, the boat builder, knew us both very well, and he knew I was starting a mast-making company. I had acquired the mast-making operation from Schaefer Marine, which wanted to close it, and started Hall Spars in 1980. When Eric Goetz got wind of it, he said: “Eric, you should talk to Phil Garland. He’s looking for something to do. Phil is a great rigger, you’re a great mast maker: get together and you’ll have a great mast and rigging company.” So that’s what we did. We incorporated two companies, Hall Spars and Hall Rigging, and Phil ran Hall Rigging. Eventually it became one company, Hall Spars & Rigging.
 
Brieuc: What were the major turning points in the Hall Spars story?
Eric: We started in 1980, and by 1982 we were struggling; it looked like we weren’t going to make it. Then a boat docked at the Herreshoff Museum — a boat that’s well known in France, though I can’t recall its name right now — was caught in a late-fall storm. The furler came loose from the stem fitting at its lower end and flailed around in 60- to 70-knot winds, banging against the mast until it cracked. They asked if we could repair it. I said: “We could repair the cracks we see, but not the cracks we don’t see. We can only recommend building a new mast.” They agreed. We found a huge mast section and built a mast for a boat called Matoaka (ex-Gitana IV), another famous boat. It was basically a superyacht project for our tiny little company, and the money that came in saved us.
The next year, the Johnstone brothers came to us: “We’re launching a new 22-footer. Can we come and look at your mast sections?” Rod Johnstone spotted our Star boat section. We had never built a Star mast, but we had a beautiful section for them. He asked us to build him a mast, and I said yes. Then he added: “You should know that Kenyon” — that’s where my brother Ben was at the time — “is also building a mast for a prototype J/22. We’re going to bring both boats to the Sakonnet River, in Rhode Island, for a sail-off: your mast on one boat, Ben’s on the other.” It was an early spring day, dark, rainy and cold. My son Tim came along; he didn’t like it, but he prevailed. Later, they told us we had won.
All of a sudden, we had the J/22 business, and they sold a lot of J/22s, more than a thousand in the end, I think. We had plenty of work, but it was tightly costed, so each mast didn’t bring in much profit. What it did bring was huge brand recognition: before the J/22, we were maybe 10th or 12th in the marine industry; after two years in the J/22 business, we were number two or three. So, to answer your question, that was one of the major turning points.
Another milestone was one of our first big masts, for a 53-footer owned by a man named Bevin Koeppel. At the time, that was huge for us: our first mast had been for a 30-footer, and this one meant a lot of money. Another milestone was probably winning business with Pearson Yachts, for whom we made masts, mainly for the Pearson 37. That was another OEM customer, with production masts this time. And there were a great many custom boats along the way.
Then we landed our first key maxi mast: Boomerang, brand new and being built at Derecktor. That was a huge start. For Boomerang, we also made our first carbon spinnaker pole, our first carbon fiber part, not with the system we eventually developed, but with a different one we paid a royalty on. All of a sudden, we had credibility in maxi boats. Both the mast and the boat were very successful, and we got a lot more maxi mast work. That was a key point.
Our first America’s Cup mast came in 1983, when Courageous, with Ted Turner, broke its mast and we got the job to fix it. Then France 3 came to us, and we built its rigs from scratch that same year. That was our first real happy time with the French. There was a guy on the boat I really got to like: a really tough guy, a good guy and a good sailor; his name was Pascal Pellat-Finet. He was the head guy there, we got along very well, and we did a very good job on France 3’s masts. That’s how our America’s Cup work started, a memorable moment in our company’s history.
Then the really big change came when we got to build Alinghi’s masts. We also built Luna Rossa’s masts, but Alinghi was the star, and everything Alinghi needed, we built.
The other America’s Cup job I’m very proud of goes back to 1970, long before these other companies came along. It was my first job after Grumman: project engineer for Britt Chance, redesigning Intrepid. Intrepid had won the America’s Cup in 1967, and its 1967 team had decided to build a new 12 Metre, Valiant. Our syndicate bought Intrepid and hired Britt to make it go faster. We did a lot of things on that boat.
Intrepid’s masts — and I think Constellation’s in 1964 as well — had a titanium upper third, so they could be bent more: in aluminum, they judged they would break, bend or kink it. A full third of the mast’s length was titanium, welded, folded, formed: beautiful. In 1970, we chemically milled most of the titanium off and filled the spaces with beryllium, which has the weight of aluminum and the stiffness of steel. It was also powder metallurgy: the sheets were 0.015 inches thick, with four or five of them in the different areas of the mast. We cut out pockets and filled them with layers of beryllium, fewer toward the top, more toward the bottom, where the mast comes together. What we were very proud of was taking 230 pounds out of the top of the mast, very close to 100 kilos. That’s a lot up there, even for an America’s Cup mast.
We also took a lot of weight out of the deck. Britt asked if we could get Grumman to make us a spinnaker pole, and they agreed. That pole was great: aluminum honeycomb, with boron in the unidirectional direction and carbon in the ±45° plies. The carbon resisted the twist, and the boron provided the strength. It weighed 39 pounds, replacing a 90-pound pole, which meant it could be kept forward on the deck.
It also lowered the boat’s VCG. Before, the mast had a corrector weight at its base, because the mast’s center of gravity was higher than the rule’s minimum VCG; and even with that weight, it still wouldn’t come down to the minimum. When we finished the project, the corrector weight sat right at the minimum VCG, so the mast’s moment of inertia, especially in a seaway, was vastly reduced. We think it made Intrepid much better in a seaway, much better than Valiant, for example. We did a lot of other things on that boat, but that was one of my favorite engineering accomplishments.
We also made a superyacht mast for a 64-meter boat, a big, big Wally named A Better Way or something like that. It was about the biggest mast we ever made. I always had to go to the top of every one of my masts: I wanted to keep setting new altitude records, and that’s the highest mast I ever climbed. To prove I went up there, I took selfies; I think they’re the first selfies anybody ever took. Since I’m a pilot, it felt like being in the landing pattern at an airport, it was so high. That was the biggest thing Hall Spars ever did, and one of our signature accomplishments.
By that time, I was mostly just talking to customers, and at regattas, if they had a problem with their masts, I’d go. But by then we had really good engineers and made good masts.
Brieuc: What was the toughest challenge in pioneering carbon fiber spars?
Eric: We chose mandrel molding, to make one-piece, continuous, seamless masts, and perfecting it was a challenge. At first we used aluminum mandrels: the aluminum would expand with the heat and, in theory, contract again while the carbon stayed in place, so you could pull the mandrel out. The problem was that the extrusions were never perfect, and there were times when we couldn’t even pull it out. Those were bad days. Then we determined that glass mandrels had the same thermal expansion as aluminum, so we had perfect glass mandrels made, and after that we never had a problem pulling the masts off.
I’d have to think some more about the other problems with carbon fiber, but we had very good engineers, including a very, very good composites guy we hired named Jeff Kent. I don’t think he’ll mind me calling him a little flaky. He kept odd hours but was a gifted composites guy. He was a DN ice sailor and made his own DN masts, which suited us fine.
DN masts are hugely bendy and bend to windward. He was good at making them, and he raced at world-class level. The most complex design we ever did was a furling mast, like a Hood furling mast: mating all the pieces together was a puzzle, almost like a Rubik’s Cube. Jeff figured out how to put them all together. He was just really good at problem solving.
Around that time, the America³ team saw an America’s Cup boom we had made for the Japanese, simply with vacuum bagging. We told them we really believed a high-pressure heated autoclave would be better. They said: “Put in an autoclave and we’ll give you business seven days a week until the end of the America’s Cup.” And they did. One big project, for instance, was the keel mount for the America³ women’s team boat, which you may have seen here in Bristol, out in the yard. We made eight Nomex honeycomb spinnaker poles and five or six booms. We never made their mast, but we never stopped working, to the point where we were almost asking them to slow down. Jeff was our contact with them, and he just kept bringing in more business, which sometimes got us into a few fights. But what we did was very special, and the America³ work was certainly a highlight of Hall Spars’ life.
 
Brieuc: What did your 2024 National Sailing Hall of Fame induction mean to you?
Eric: It meant a lot; I’m very, very proud of it. My brother and I went in at the same time, and we were recognized as a brother combination, because we sailed Flying Dutchman together and were even national champions one year.
Ben is the best sailor in the family. My older brother, Ned, raced on two America’s Cup winners: as bowman on Weatherly in 1962, and as a trimmer on Intrepid in 1967. A great sailor, and he was always the one who steered. In that framed picture over there, the helmsman is Ned.
Ben was also a great sailor. My father’s boat was a 56-foot ocean racer. Wherever we went, we launched the dinghy, which had a rig. When my father didn’t have us working, we’d sail up to a mooring and back, timing each other to see who would win. Ben won most of them. I told myself it was because he was 30 pounds lighter than me. But no: Ben was simply a much better sailor, and it took me a while to figure that out.
So he was inducted mainly as a sailor, and I was inducted for my technical contribution, some of which we’ve already been through. Having my technical work recognized makes me very proud.
 
Brieuc: Let’s talk about the engineer in you. What keeps you looking for better solutions to familiar engineering problems?
Eric: As we discussed earlier, there are a bunch of things, but first of all, simplicity. Simplicity is what I call the holy grail of engineering: utter simplicity. And you can never stop making something simpler.
In all my engineering work, I also had a list: it’s got to be strong, serviceable, able to be installed and taken out, and maybe a few other things. And I always tell people the last one, number six, is that it has to look cool.
So when it comes to existing engineering concepts, I always want to make them simpler, with every part strong enough and resistant to corrosion, but good looking. To me, an engineered product has to look good, and it’s very clear that Karver understands this too. Karver products are very good looking, and it’s not an accident.
Brieuc: Which invention are you proudest of, and is there one you wish you had developed further?
Eric: Some things aren’t exactly inventions, but when I started the business, I wanted masts to be made of advanced, aircraft-grade composites. So I insisted on getting an autoclave, and I’m very proud of that. But the carbon mast isn’t really my invention.
Among the smaller inventions, I’m very proud of the Quick Vang, a stiff boom vang with a spring and a tackle inside. It was a huge seller and made a lot of money for Hall Spars. I’m also very proud of coming up with carbon rigging, as well as streamlined airfoil rigging, which we didn’t take very far. But I’m probably proudest of the automatic locks, and then of their magnet version, which eliminates all the springs: Alphalock.
 
Brieuc: What was the hardest technical challenge with Alphalock, and what makes its approach distinctive?
Eric: Nobody else anywhere makes halyard locks with what I call solid-state mechanisms, using magnets. Everything else works with springs, ball detents, latches, all kinds of things, whereas Alphalock is pure, very, very simple. But getting to very, very simple took a long time: we had to figure out how to place the magnets to make it work.
Early on, there were a lot of real problems. Some things just wouldn’t work right, and I had to keep at them if I wanted to have a product. So I kept at them, and slowly it got better and better. I had an awful lot of help from a local machine shop: whenever I needed a different part or an improvement, they could make it for me pretty quickly. I always had someone in my back pocket to make things for me.
I designed the initial Hall Spars Autolock, when it was a spring-loaded design. I did a lot of machining at Hall Spars on the big Bridgeport machines, but I learned early — and others learned it too — that I was a pretty poor machinist. It took a long time to find the correct orientation of the flipper and how it locks with the bullet. It looks so simple and so clear now: a good engineer like you can look at the finished product, figure it out and duplicate it. But getting there was quite a journey.
There were so many frustrating times: it wouldn’t work, and it wouldn’t work, and then it would work three times but not ten. Those were the difficult days before we got to where it is today. With this system, if I have anything to do with it, the shape isn’t changing: it will always stay the same, just get bigger. Here’s a bigger one, and there are some even bigger ones here: they’re all exactly the same shape, to scale, with just a couple of minor differences.
 
Brieuc: Let’s change the subject a bit. What does sailing mean to you when you’re on the water?
Eric: First of all, I have a lot of interests, and sailing is only one of them. I love playing hockey, I’ve really gotten into RC model airplanes, and I play the violin in an orchestra — or did until recently. Though you don’t want to hear me play the violin!
But when I’m out sailing… I’m picturing something right now: in a race, coming from Conanicut Island in a fresh southwesterly, maybe force three, maybe force four in the puffs, heading up Narragansett Bay in the sun, a beautiful place. All of a sudden I sit there and say: this can only be called heaven. It’s so beautiful, you’re with your friends, the boat is going along… And it didn’t hurt to know we were winning the race.
But generally, I’m not someone who just goes sailing. It takes me a while to get in the boat, but if a friend says let’s go sailing, maybe I will. For example, late in the afternoon in Newport Harbor, with my boat, Blackwing, you sail around. It really is a beautiful boat, and the graphics help a little. You sail close by the other boats, it’s very crowded, and probably four or five times during the evening, someone says: “What a beautiful boat!” That’s what makes sailing fun.
Once I’m in the boat and on the water, I love sailing, but I don’t sit at home thinking: “Gee, I wish I was sailing.” I always go sailing to race. How many times have I gone sailing just for the fun of it in the last eight years? Five maybe, with friends. But still, when I’m out there, I love it. I just love it.
Brieuc: How has American sailing changed over the past 50 years, and what do you miss?
Eric: That’s an interesting question. We had an anniversary celebration at the Naval Architecture Department of the University of Michigan — the 125th, or maybe less. They asked the older students what had changed since they studied there.
So I took a racing sailboat and showed how the weight of everything had come down over the years: aluminum masts went to carbon, wire rigging went to rope rigging, and of course hulls became composite. But I concentrated on just the rigging. We figured out that between 1965, when I graduated from Michigan, and then, the weight of a mast had been reduced by something like 60 or 70 percent. Huge.
That, in a nutshell, is how far my side of the business has come. You know all about carbon fiber boats and sails; I’m not a sailmaker, but it all moved in the same direction. Sails in 1965 were certainly heavier than they are today. Our family boat had a couple of cotton sails. I was probably nine years old, and we had to “stop” the sails: roll them up and tie them with string so they could be hoisted in stops; then you’d pull a string and they’d pop out.
We kids had to do it, not my father’s crew, who were friends. We did it Monday and Tuesday morning after the race, and those cotton sails were really heavy. Then Dacron came along and they got lighter. That’s just one example among many: in my lifetime, sailing technology has really come a long way.
 
Brieuc: How do you see French sailing culture and offshore racing compared with the US?
Eric: There’s no comparison, none. Here we race in regattas on boats of 70 or 80 feet maximum, under IOR or other offshore rules, and we also have rating rules like PHRF. That’s not very impressive once you start talking about French sailing at the highest levels, with the IMOCA boats. They’re not even in the same time zone: the innovation on those boats, with the foiling and everything, is so far advanced and advancing at such a fast clip that there’s nothing like it here.
We did win the Volvo Race, or whatever it’s called now, with the American Charlie Enright, but on a French-type IMOCA boat, a foiler I think. All you have to do is pick up Seahorse: most of the really advanced stuff has French addresses, and if it doesn’t, it’s an owner copying French ideas. It’s always been that way.
I think I told you at lunch that I admire the French because nothing gets in the way of their thinking; nothing is already decided. The French think outside the box, and if they have an idea, they don’t worry about what other people will think of it. They just do it, and most of the time it ends up being a really good product. I think that’s why American sailing just can’t compare with French offshore sailing.
We have the Bermuda Race, with a lot of boats every year, but nothing very impressive. They’re bringing back the Admiral’s Cup, which is fine, but again… There’s also the Trophée des Multicoques, catamaran racing in La Rochelle — I don’t know if it’s still going on — and Formula 40. Catamarans especially are always coming up with new things. But the IMOCA boats are the ultimate example: they’re just amazing.
Brieuc: Let’s talk about Karver to finish. What made Karver the right partner for Alphalock’s next chapters?
Eric: I always liked Karver and always looked closely at their products. Tanguy visited me twice, I think, at Hall Spars in Bristol. I liked Tanguy, and he had good products, the stoppers. They were doing the same thing as the English Spinlock stoppers, which were good products but not interesting looking. Everything Karver made was good, but looked much better. And you know from earlier in this conversation that I like that.
At METS, my first stop was almost always Karver, to see what you were doing and maybe get a little inspiration. But it was also very hard to compete with Karver, because your prices were very low. It took finding the right combination of vendors before I could finally compete. Everybody always said: “Eric, your locks are great, but Karver is 40% cheaper.”
Honestly, I thought Alphalock was better, but the point was that Karver understood the purpose of locks, and of other things like blocks, in a way other companies didn’t. Karver may not be the biggest company in the world. People maybe get lost at Lewmar. I don’t think people get lost at Harken: it must be a great place to work, where people get to do what they want to do.
Harken would have been another very good home for Alphalock. But for some reason they seemed to have problems with locks and got very disenchanted with them; they didn’t want to know about Alphalock at all, because they didn’t like locks. They hated having to make them, just like a lot of people at Hall Spars hated our locks, because they were a problem. You’ve seen the early versions: they were difficult.
One guy at Hall just loved them and worked on them all the time to make them work, even going to customers who were having a problem. Same with Freddy Franssens in our operation in Holland: he’d stay up until three in the morning to fix the lock on a TP52, just because he liked doing it. Sadly, he was lost when a boat he was sailing on lost its keel and capsized, and everyone on board was lost. There are very few people like that, and you have to have them.
By the time Alphalock came along with the magnets, it was ready to show somebody. Getting back to the question, Karver was the perfect company to buy the lock. I dreamed a lot about Karver buying it, because you had this ideology about locks and their importance: “We make locks, we make them work, locks are important.” I could see that. So there was a welcoming place for Alphalock to grow at Karver. I wanted it to have a friendly, welcoming new home, and I knew Karver would be good.
 
Brieuc: Last question: what would you most like to see Alphalock become over the next 10 years?
Eric: I’m thinking of the applications you and I talked about, but I think they should stay unmentioned for now. I’d just like to say that any spring is a target. I’ve really become a big believer in magnetic, what I like to call solid-state mechanisms, because they don’t move. In the lock, the only things that move are the locking flippers; nothing else moves, and I like that. That’s why I call it solid state.
You can think of a whole bunch of products to add this solid-state concept to, and it doesn’t take much time: stoppers, furlers with built-in locks, maybe winches, who knows? For all of them, you can find applications for this technology in the next 10 years.
 
Brieuc: Which French sailors inspired you?
Eric: I raced Formula 40, and I told you a story about working with Alain Comyn, who was the skipper of Région Nord-Pas-de-Calais in Formula 40 in 1987. He raced in that series, though he didn’t win it, on a Gino Morrelli catamaran. There was another boat built at the same time, named after some cigarette company, but I can’t remember its name or its skipper.
One of my absolute favorite people in all of French sailing is Bernard Nivelt. He was the perfect example of the French sense of humor — a master of it. He could say very, very funny things, but also interesting things. When I spent a lot of time with Bernard, I was really into very big catamarans, which could solve a lot of accommodation problems. And he said: “Eric, I love catamarans, but I’d much rather sail keelboats, because keelboats don’t get very far away from each other in a race, while catamarans sometimes get out of sight of each other. It’s no fun racing if you’re way ahead or way behind, whereas keelboats go so slowly that you’re always close enough to think you’re in the race.” He’s a great guy.
There’s also Didier Dupuis, who was part of the Corum team when it won the Admiral’s Cup for the first time, in 1987 maybe. I don’t remember much about him.
I also enjoyed working with the CRAIN engineering firm in La Rochelle, though I don’t remember any names.
And then there are the FD sailors who inspired us: Yves and Marc Pajot. They’ve become other things since, but they were really good FD sailors, French champions or something like that. We also loved sailing against FD sailors Eric Duchemin and his crew Daniel Nottet. Eric has remained a lifelong friend even though we have always been competitors in the mast business!
We loved sailing against these sailors, and it meant something if we could keep up with them. Those are just a few of the French sailors I admire; give me a couple of weeks and I’d come up with more, but for now, those are the highlights.
 
Brieuc: Thank you, Eric, for all these insights. It was fascinating.

Country delivery

Prices and availability of products vary depending on the delivery address.
Please select your country to adjust this information:

: 1. Article one: Contract formation 1.1 Conflict between general terms and conditions of sale and general terms and conditions of purchase: The present general conditions of sale define the terms of execution and the conditions of sale between KARVER and its customers. To place an order implies a full and complete adhesion to the general conditions of sale described below. Sales are always made by mutual agreement between the parties as set forth below. These provisions cannot be modified by contrary stipulations contained in the general conditions of purchase of the customer or any other document without written agreement of the parts. 1.2. Consent: 1.2.1. Offer: Karver products’ offers accomplished by quotations can only be valid if they have been accepted in the indicated delay. All offer made by Karver will only become irrevocable after written confirmation by Karver to the client’s purchase order. 1.2.2. Acceptance: this can be done according to the forms and uses in force in commercial matters and in particular by mail, fax, telephone, internet or e-mail. 1.3. Cancellation: any request for cancellation of an order for any reason whatsoever may be examined only by payment of a cancellation indemnity set at fifteen percent (15%) of the net price excluding tax of the order. For custom orders, deposits will not be refunded. 2. Article two: Sold goods KARVER reserves the right to apply at any time any modification that it deems useful to its products without prior notice 3. Article three: Settlement terms 3.1. Terms of payment: The invoices are payable at the headquarters of KARVER Honfleur by credit card or wire transfer. 3.2. Payment period: 3.2.1. Principle of the will of the parties: The payment periods can be set freely by the parties but cannot exceed 60 days. 3.2.2. 30-day payment: The payment of KARVER products by customers who already have an account with KARVER is made on the thirtieth day following the date of receipt of the goods (Article L.144-6 of the French Commercial Code). 3.2.3. Special deadlines: Payment for Karver products ordered by new customers or customers who do not have an account with KARVER will be made in full payment before shipping. 3.3. Late payment penalties: 3.3.1. Methods of calculation: The sums not paid at the due date will result in the payment of monthly indemnities equal to 5 times the legal interest rate on the amount of the sum due, the payment of the totality of the remaining will stay due and deliveries will be suspended. In addition, a lump sum compensation for recovery costs of 40 euros is applied in accordance with Decree No. 2012-1115 of 2 October 2012 for any late payment over 10 days. 3.3.2. Late payment penalties are applied if the sums due are paid after the payment date shown on the invoice. Penalties are due without any reminder being necessary. They run automatically on the day following the date of payment on the invoice, or failing this, on the thirty-first day following the date of receipt of the goods. 3.4. Discount for upfront payments: There would be no additional discount for payment granted before shipping. 3.5. In the event of cessation of payment, bankruptcy filing, settlement or declaratory judgment against the client, the latter shall notify KARVER without delay so that an identification and an inventory of Karver products sold but not yet fully paid and cashed can be established and that the ownership clause can potentially be established. 3.6. In case of unpaid of all or part of a term, KARVER, without losing any of its rights may require the return of all products corresponding to orders not yet paid. 3.7. Karver may claim in the hands of the sub-purchasers the price or part of the price of products sold by Karver to the customer which have not been fully paid or cashed. In this case the customer agrees to provide any relevant information regarding to the sub-purchasers. 4. Article four: Price schedules, discounts and rebates 4.1. Prices: prices are “ex works”, packaging included, at the rate in force at the time of the order. Karver reserves the right to modify its rates according to currency fluctuations, raw materials or cost price. 5. Article five: Orders 5.1. The general conditions of sale apply to all sales, by signing the order, the customer accepts unconditionally the conditions of sale and waives any application of its General Conditions of Purchase. 5.2. Our orders are final from the moment they are confirmed in writing. Any modification can be taken into account only if it arrives in writing before the shipment of the products. In case of order modification our deadlines can be postponed. Similarly, if our buyer does not accept the change, the down payments will not be returned. 5.3. In case of late payment KARVER may suspend all outstanding orders without prejudice or any other actions. 6. Article six: Jurisdiction For all disputes relating to sales made by Karver and the application or interpretation of these Terms and Conditions of Sale, only the Commercial Court of Lisieux (France, 14) will be competent. 7. Article seven: Force Majeure KARVER is not liable in the event of fire, flood, interruption of supply of energy, raw materials or spare parts, as well as total or partial strikes of any kind impeding the smooth running of the company, such as transport strikes, postal services … The occurrence of a case of force majeure has the effect of suspending the execution of the contractual obligations of KARVER. 8. Article eight: OWNERSHIP RESERVE CLAUSE : 8.1. KARVER expressly reserves the ownership of the KARVER products delivered and designated in the sales contract until full payment of their price in principal and interest. 8.2. The goods will remain the property of KARVER until full payment of their price, but the buyer is responsible for them as soon as they are physically delivered, the transfer of possession entails the transfer of the risks as well. Signing this document, the buyer undertakes to subscribe an insurance contract guaranteeing the risk of loss, theft or destruction of the goods. 8.3. The transfer to the buyer, the disadvantages, the risks of loss or the deterioration of the products are subject to the retention of title. In case of application of the reserve of the property after the partial payment, the installments paid will be our property in counterpart of the depreciation undergone by the products. 9. Article nine: Delivery, receipt, returns 9.1. Receipt of products 9.1.1. KARVER deliveries are made by private carriers mandated by Karver at the expense of our customers. In the case of a carrier mandated by our customer, the goods will be transported at the expense and risk of it. 9.1.2. In case of apparent defect or failure the customer will have to make findings and reservations with his postal services on the transport receipt. 9.1.3. Deliveries can only be made if KARVER’s clients are up to date with their obligations. 9.1.4. Lateness cannot entail a cancellation of an order or any claim for damages. 9.1.5. All claims regarding apparent defective and non-conformity of products must be received within 8 days of delivery of the products. The client must then provide all the justifications on the reality of the defect and leave to KARVER any possibility to note the defect itself and to remedy it. 9.2. Delivery times Delivery times are given for information only and without guarantee. A delay does not entitle the buyer to cancel the sale, to refuse the goods or to receive damages. 9.3. Returns No return of Karver products can be made by the customer without the express written consent of KARVER. Returning costs will be borne by KARVER only in the event that an apparent defect is actually noted by the latter. Unless prior authorization, only the carrier chosen by KARVER is authorized to return the products concerned. 10. Article ten: The lack of conformity of the goods 10.1. The goods travel at the risk of the customer to whom it belongs to check the good condition at the time of delivery. This verification must relate to the quality, quantities and references of the goods and their conformity with the order. No claim will be taken into account after a period of fifteen days from the day of delivery. 10.2. Goods with a recognized defect of conformity, reported within 8 days, is subject to replacement or restoration, to the exclusion of any compensation, for any reason whatsoever. 11. Article eleven: Warranty Karver products are warranted for pre-sale defects making our material unsuitable for the intended use or which reduce such use so much that the buyer would not have acquired it or will not would have given a lower price if he had known them, in accordance with the provisions of articles 1641 and following of the civil code. The customer can only benefit from the guarantee if he notifies KARVER by registered letter as soon as possible. 11.1. Contractual Warranty: Karver products are warranted against defects in material or confection for a period of one (1) year from the date of delivery to the Professional Customers and two (2) years to the Private Customers from the date of sale. Under this warranty, the only obligation incumbent upon KARVER will be the free replacement or repair of the product or item found to be defective by its services to the exclusion of any other indemnity or damage and interest, the possible shipping costs being the responsibility of the customer. Defects and deteriorations caused by natural wear and tear, by an external event (product not adapted to real loads, assembly not conforming to the technical instructions of KARVER, defective maintenance, abnormal use or in competition …) or by a modification of the product not specified or specified by KARVER are excluded from the warranty. In the same way the guarantee will not play for the visible defects. 11.2. Legal guarantee: Under the guarantee of hidden defects, KARVER will only have to replace without charge the defective products excluding the repair of any other damage, shipping costs will be paid by the customer. 12. Article twelve: Use of the products Our buyers declare to have all the technical competences, to have taken note of our documentation to have been perfectly informed on the use, the handling, the dangers of the products and in case of doubts to appeal to one of our technicians. No other warranty than those contained in our documentation will be able to be declared to the customers. 13. Article thirteen: Custom, customized products: For professionals, our custom products are designed with their technical teams and meet the specific instructions that are communicated to them by them. Therefore, they are excluded from any warranty and their sale is made at the risk of the buyer who cannot, in particular, invoke a hidden defect. 14. Article fourteen : Spare parts: The duration of availability of our spare parts is at least 3 years from the date of purchase by the private customer. This indication is included in our user manuals.

 

Register our newsletter :