3D Sailing gear products TO PRINT
The development and accessibility of 3D printers gave us the idea to provide you with a number of ready-to-print 3D files for free.
You will find Karver parts but also some basic generic products.
This space is yours, if you have special requests or files that you want to make available to our small community, do not hesitate to contact us.
The diversity of materials that can be used to make 3D printed parts is too numerous to be able to commit to the resistance and durability of the designs made available. Printing and use are therefore your own responsibility.
Stanchion fitting (Design Jannis Bader)
– File in .STL
– Technical drawing .PDF
Note :
These files were sent by a young Dutch industrial design student. Thanks to him for his contribution (and patience).
Hook (Design Malo Holmogorof)
– Hook for 20mm broom handle (.SLDPRT)
– Hook for 22mm broom handle (.SLDPRT)
– Hook for 24mm broom handle (.SLDPRT)
– Hook for 26mm broom handle (.SLDPRT)
Note : The 4 files make it possible to adapt to different broom handle diameters.
Boat plugs (Design Malo Holmogorof)
Note : Design from a young French student from ICAM Nantes. Thanks Malo!
Lifeline hook
Note: Allows you to attach a lot of stuff to your lifelines (fenders, ropes, cushions, …). Max passage on lifeline side: 6 mm
Lashing block. Max 14 mm. Max 400 kg working load
Note : 3 parts to print (sheave + 2 sides). To assembly with 2 screws (M4 x25 mm) + nuts. Plastic or stainless-steel ball bearing block to supply (5 mm ball x 36)